APX32 Three Phase Duplex Control Panel-CONTROL PANELS-SJE Rhombus (Suzhou) Co., Ltd.

< >

Product Name

APX32 Three Phase Duplex Control Panel
Product Features

The APX32 three phase, smart pump control panel is designed to control two pumps at 380/400VAC, 50Hz.
The control panel is compatible with multiple level sensors: float switches, air pressure, SJE SL-10F level transmitter, or a 4-20mA
level transmitter.
It provides comprehensive level monitoring, pump protection and alarms for high level, pump failure, and signal failure.
It complies with EN60335-1, EMC (electromagnetic compatibility), has built-in IEC motor overload protection, and it is designed in a
sleek and compact enclosure.
The control panel uses a high-definition, color touch screen, for simple set up, operation and troubleshooting
Product Introduction

Typical applications： Lift pump chambers, sump pump basins, holding tanks, and other water applications.
Authentication

CE、UKCA

Technical Parameter

• Sleek appearance, compact size

• UL certified enclosure, high strength and UV resistant, 5VA flame retardant

• Integrated mounting feet for simple, quick, and secure installation

• IP66 protection, clear door for easy viewing

• Compatible signal inputs, include float switch, SJE SL-10F level sensor, 4-20mA transmitter (Air Pressure input to be ready)

• Redundant control with level transmitter and back up high level float switch

• Auto detection for float switch or level sensor failure, activate backup control automatically

• High quality touch screen to indicate pump status and liquid level, with convenient operation or setup

• Simple and intuitive parameter set up

• Pump run time, cycles, and faults data log

• Dynamic liquid level displayed on screen

• Chinese and English languages, unit in cm and inch

• Simple transmitter calibration

• Pump failure detection and alarm, automatically switching

• Automatic pump alternation (Duty pump selectable)

• High level backup float switch will also run the pump

• 360° sound and visual alarm

• Automatic alarm reset, one-touch test/silence

• Short circuit, overload, dry run, pump over temperature, surge,

• over voltage, under voltage protection

• Phase loss, incorrect phase sequence, phase unbalance protection

• Adjustable start and stop delay

• Rapid cycle monitoring, overtime run protection

• Scheduled test run (Programmable)

• Alarm relay to interface with BMS

• RS485 remote connection interface (MODBUS RTU)

• WiFi Connection for remote monitoring and alarm notifications (optional)

TECHNICAL SPECIFICATIONS:

• Rated voltage: Three-phase 380/400VAC, 50Hz (With neutral line)

• Rated motor current: 1.0A ~ 11.5A

• Operating temperature: -5ºC ~ 40ºC (-41ºF ~ 104ºF)

• Protection level: IP66

• Enclosure Flame Rating: UL94 5VA

• Enclosure dimensions: H280 × W253 × D131mm (H11 ×W10 × D5.2 inch)