Reliable long-life operation with low to no maintenance
Industry standard 4-20mA, 2-wire loop powered
Built-in internal stabilizing weight
Reliable long-life operation with low to no maintenance
Industry standard 4-20mA, 2-wire loop powered
Built-in internal stabilizing weight
The Sub-X® submersible level transmitter is designed for continuous level monitoring. It measures the hydrostatic pressure of the water above the sensor and outputs a standard 4-20 mA signal proportional to the water level. The robust design of the Sub-X® transmitter provides a reliable and low maintenance solution for level control applications, including sewage/effluent lift stations, stormwater pump stations, non-potable water systems, tanks, wet wells, and reservoirs.
The transmitter wetted components are designed with nonconductive materials to provide an electrical isolation barrier. The pressure sensor is isolated from process material by a protective VITON® diaphragm. Stainless steel mounting bracket and cord strain relief are included.
CE、UKCA
MEASURING RANGE:
• 0 – 5 meters (0.5bar or 7.25 PSI), grey cord seal
• 0 – 10 meters (1bar or 14.50 PSI), black cord seal
ACCURACY:
• 1% full scale
OPERATING TEMP:
• 0 – 50°C
OUTPUT:
• 4-20 mA, loop powered
EXCITATION VOLTAGE:
• 8-32 VDC reverse polarity protected
OVERPRESSURE PROTECTION:
• 4Bar (40.7mWC or 58 PSI)
PROTECTION GRADE:
• IP 68 for permanent submersion
SENSOR HOUSING:
• PVC, 3.09” diameter x 7.67” length (79 mm x 195 mm)
CABLE:
• PUR, 22 AWG, 2-wire shielded with vent tube and drain
DIAPHRAGM:
• VITON®, Dia. 32mm
WEIGHT:
• Approx. 1.1 kg (cable not included)
